A cannon on its carriage: the 6-pdr bronze field gun, Model 1839-1844, on its M1841 carriage, as the 1862 Ordnance Manual gives them.
The gun stands on level ground, its axle across X at the origin's Z, its muzzle toward +Z. muzzle is the muzzle's face, +Y along the bore; vent is the vent's outer orifice on the breech, +Y out along the vent, which leans to the rear; both ride elevation, a hinge on the trunnions' axis whose positive travel raises the muzzle up to the manual's 12 degrees and whose reverse lowers it its 8 degrees below level.
The elevating screw is the driver. Turning its handle sinks its head by the pitch times its turns; screwRise translates it in its brass box, and elevation follows the base ring's reference height through a table at every whole degree. The pitch is borrowed from the mountain howitzer's screw, provisional (FIELD_GUN.SCREW). The table models vertical coupling; the ring's breadth and the screw head's full contact geometry remain unread. The elevation coupling is reversible, so an author may name either the screw or the desired elevation in a state, but never both; existing elevation-based launches use the same relation. The handle rides the translated head.
trail is the top of the trail's end, where the trail handspike bears to traverse the piece; where the pointing rings sit on it is unread. The friction primer stands in the vent and the lanyard's toggle 12 ft behind it fires it when drawn by the wire's length; the handspike, the limber's pintle seat, the axle and each wheel's top (leftWheel, rightWheel) are the crew's other contacts. muzzleVelocity, recoil and ball are the manual's and Gibbon's. leftSpin and rightSpin turn the wheels on the axle, a positive turn rolling them forward. The gun rests on its iron tires and its wooden trail, two materials, so its body carries no friction.
A cannon on its carriage: the 6-pdr bronze field gun, Model 1839-1844, on its M1841 carriage, as the 1862 Ordnance Manual gives them.
The gun stands on level ground, its axle across
Xat the origin'sZ, its muzzle toward+Z.muzzleis the muzzle's face,+Yalong the bore;ventis the vent's outer orifice on the breech,+Yout along the vent, which leans to the rear; both rideelevation, a hinge on the trunnions' axis whose positive travel raises the muzzle up to the manual's 12 degrees and whose reverse lowers it its 8 degrees below level.The elevating
screwis the driver. Turning its handle sinks its head by the pitch times its turns;screwRisetranslates it in its brass box, andelevationfollows the base ring's reference height through a table at every whole degree. The pitch is borrowed from the mountain howitzer's screw, provisional (FIELD_GUN.SCREW). The table models vertical coupling; the ring's breadth and the screw head's full contact geometry remain unread. The elevation coupling is reversible, so an author may name either the screw or the desired elevation in a state, but never both; existing elevation-based launches use the same relation. The handle rides the translated head.trailis the top of the trail's end, where the trail handspike bears to traverse the piece; where the pointing rings sit on it is unread. The frictionprimerstands in the vent and thelanyard's toggle 12 ft behind it fires it when drawn by the wire's length; thehandspike, thelimber's pintle seat, theaxleand each wheel's top (leftWheel,rightWheel) are the crew's other contacts.muzzleVelocity,recoilandballare the manual's and Gibbon's.leftSpinandrightSpinturn the wheels on the axle, a positive turn rolling them forward. The gun rests on its iron tires and its wooden trail, two materials, so its body carries no friction.