AutoMovie API
    Preparing search index...

    Interface IAutoMovieBoundaryFace

    The located planar face of a boundary and the frame openings are measured in.

    The frame is a full rigid placement, never a heading: local +X and +Y span the face and local +Z is the outward normal, so a wall leaning out of plumb or a sloping soffit is stated exactly rather than flattened to a compass direction. Every opening on the boundary is written in this frame's metres, so whether a door lies inside its wall is one planar containment test.

    The patch is planar. A curved separation is authored as several flat boundaries rather than as one face whose surface the containment test would have to approximate.

    Validation checks finite origin, unit rotation, positive finite thickness, at least three finite corners with consecutive spacing above 1e-9 m, finite doubled area magnitude above 1e-9 and the approximate simple-ring predicate. It does not check that the face borders its cited volume or +Z points outward. Envelope derivation flips authored +Z only when one probe 0.001 m along it from the shoelace centroid is inside the space; it does not test the opposite side, and a concave outline's centroid can lie outside its patch.

    interface IAutoMovieBoundaryFace {
        origin: IAutoMovieVector3;
        outline: IAutoMoviePlanarPoint[];
        rotation: IAutoMovieQuaternion;
        thickness: number;
    }
    Index

    World-space origin of the boundary's own frame.

    Closed face outline in boundary-local XY metres, at least three points.

    The outline is a simple polygon: it may be concave, but it may not cross itself, because a self-crossing outline has no inside for an opening to be checked against.

    Unit quaternion taking the boundary's local axes into world space.

    thickness: number

    Positive separation thickness along the boundary's local +Z, in metres.