AutoMovie API
    Preparing search index...

    Interface IAutoMovieHumanSeam

    A declared seam between two pieces of a divided part, as data.

    Divide and conquer builds every piece in its own frame by its own rule; the pieces merge only at declared seams. Each seam has one owner, which evaluates the shared curve and publishes its jet (see AutoMovieHumanSeam), and one neighbour, which converts that jet to its own parameter and copies it. The declaration is what a seam observer reads: it measures gap, normal angle and normal-curvature jump on the emitted skin across curve, in the plane normal to the seam's tangent, against continuity.

    • G0: both pieces pass through the same points.
    • G1: they also share the tangent plane (for a curve, the tangent line).
    • G2: they also share the normal curvature across the seam (for a curve, the curvature vector).

    A relief window needs no declaration: its height, slope and curvature vanish at the window's edge by construction (IAutoMovieLoftRelief).

    interface IAutoMovieHumanSeam {
        continuity: IAutoMovieHumanSeam.Continuity;
        curve: string;
        name: string;
        neighbour: string;
        owner: string;
    }
    Index

    Order of contact the neighbour must reach.

    curve: string

    Address of the shared curve: a principal section <chain>/<k>, a guide <chain>/g<j>, a root loop or another named curve its readers resolve.

    name: string

    Seam identity in findings, such as hand.web-2 or head.face/P.

    neighbour: string

    Piece that copies the owner's jet.

    owner: string

    Piece that evaluates the shared curve and publishes its jet.