AutoMovie API
    Preparing search index...

    A band of a sweep's domain whose column count changes across it, so a sweep can carry more columns where it needs detail, such as a groove, and fewer where it meets a coarser ring.

    The band runs from its start ring at u[0] to its end ring at u[1] in rows even rows, with start columns evenly spaced round the first ring and end round the last, so it welds onto sweep patches of those counts on either side. Give it rows so its middle row is about as tall as a coarse column is wide: on a cylinder going from 8 to 16 columns, a middle row half that tall bends the limit normal round the poles by 8 degrees instead of 5. Its middle row reduces the finer ring to the coarser by (fine - coarse) / 2 blocks of the 2-to-1 quad reduction strip, each turning four fine columns into two coarse columns through six quads with two interior poles of valence three half-way across the row; every other column passes straight through, and rows before the middle keep the start count and rows after it the end count. The fine ring stays regular; the coarse ring vertices at the blocks' corners take valence five beside a straight column and six between two blocks. Blocks spread evenly round the band and mirror with it, as layoutAutoMovieSurfaceTransition states. Vertices sample the sweep with the rig's cell averaging. With fitting enabled, free limit vertices interpolate those filtered targets; the surface between them still depends on subdivision topology; put the band where the sweep is gently curved along u, because its poles carry the most curvature error, and narrow its v range to keep them off a region, splitting the ring into several bands.

    Counts must differ by an even number, the finer at most twice the coarser, so a larger change chains two bands; equal counts give plain rows. The patch's (s, t) coordinates run along v and u as a sweep patch's do, but its faces are not a grid: each face's corners carry their own coordinates.

    interface ITransitionPatch {
        end: ICounts;
        name: string;
        rows: ICounts;
        start: ICounts;
        sweep: string;
        type: "transition";
        u: [number, number];
        uv?: IUvRect;
        v: [number, number];
    }
    Index
    end: ICounts

    Columns along the end ring by tier.

    name: string

    Name unique among the patches.

    rows: ICounts

    Rows across the band by tier; the middle one changes the count.

    start: ICounts

    Columns along the start ring by tier.

    sweep: string

    Name of the sweep.

    type: "transition"

    Discriminator.

    u: [number, number]

    Range of u, increasing, within 0 to 1: the start ring and the end ring; t runs along it.

    uv?: IUvRect

    The patch's rectangle in texture space; omitted, the sampler assigns one.

    v: [number, number]

    Range of v, increasing, at most one turn; s runs along it.