AutoMovie API
    Preparing search index...

    Namespace seated

    The geometry every seat law shares: where on a seat the body's seat socket rests, the root that puts it there under a trunk pitch, whether a seat suits the body, and the hands resting on the thighs.

    A seat is given as the sitting surface's frame the way an IAutoMovieAffordance of kind seat states it: a world point at the middle of the front edge, the heading the sitter faces, an optional depth back from the edge and an optional backrest height. Sitting brings the body's seat socket (under the ischial tuberosities) onto the seat; everything else follows by inverse kinematics and the trunk's pitch.

    The socket rests thigh - 0.05 m behind the edge, corrected by the socket's own offset from the hip joints, so with a level thigh the knee stands 5 cm ahead of the front edge and the thigh is supported almost to the knee (provisional clearance; seating standards keep the seat shorter than the buttock-to-popliteal length); a shallower seat moves the socket forward to 2 cm inside its depth.

    A seat is sat on with both feet on the floor when its height above the floor under the feet (the ground, or the floor of a prop they stand on, as a boat's) lies within 0.8 to 1.2 of the popliteal height, the ratio the campaign sets (#3363): a lower seat needs more trunk flexion and a longer rise (Janssen, Bussmann and Stam 2002, Phys Ther 82:866) and is refused. A higher one is a high seat: a bar stool, a saddle, a wall. The feet leave the floor for its rests or hang, and the body gets onto it by a step up or a swing of a leg. The popliteal height is the knee joint's height less the thigh's radius, where the thigh's underside meets a level seat.

    RATIO
    armrest
    arms
    check
    floor
    hands
    high
    offset
    perched
    point
    popliteal
    ratio
    rested
    root
    socket