Name of the previously declared datum that constrains this curve.
The curve passes through the datum.
The closed curve lies in the plane through origin with unit normal.
Plane normal in the curve's declared frame; its direction defines the constraint plane.
Point on the constraint plane in the curve's declared frame, millimetres.
The closed curve's perimeter equals the tape.
Required geometric distance or arc length, millimetres.
Measurement or construction provenance for this required distance.
Tangent direction in the curve's declared frame, with magnitude ignored by the directional constraint.
The closed curve's extent along direction equals length.
Required geometric distance or arc length, millimetres.
Measurement or construction provenance for this required distance.
The open curve shares the neighbour's position and tangent where they meet.
Identity of the adjacent curve whose boundary jet must agree.
Required boundary agreement: 0 for position, 1 for tangent direction.
Name of the previously declared datum that constrains this curve.
Tangent direction in the curve's declared frame, with magnitude ignored by the directional constraint.
Where the curve passes the named datum, its tangent is parallel to
direction with the same sense (G1 to that direction). direction
is a unit vector in the spec's frame; its length carries no speed.
Direction along which the extremum or monotonicity is tested in the declared frame.
Name of the previously declared datum that constrains this curve.
Inclusive interval of the curve's declared parameter on which this constraint applies.
The curve's extremum along the unit axis (spec frame) on the
parameter interval lies at the named datum: sense "max" means
no point of the interval reaches farther along axis than the
datum, "min" the reverse. value is the datum's coordinate along
axis from the frame origin, calibration mm.
Which extremum or direction of monotonic change the curve must have.
Required coordinate along the declared constraint axis, millimetres.
Direction along which the extremum or monotonicity is tested in the declared frame.
Inclusive interval of the curve's declared parameter on which this constraint applies.
The coordinate along the unit axis (spec frame) is monotone over
the parameter interval: "increasing" or "decreasing" in the
curve's own parameter direction.
Which extremum or direction of monotonic change the curve must have.
Inclusive interval of the curve's declared parameter on which this constraint applies.
The signed curvature of the curve projected on the plane with unit
normal (spec frame) keeps sign over the parameter interval:
+1 turns counter-clockwise about normal, -1 clockwise. A straight
interval satisfies neither sign.
Plane normal in the curve's declared frame; its direction defines the constraint plane.
Required signed curvature orientation relative to the declared normal.
A constraint the constructed curve must satisfy, checked independently of the constructor.