A plate piece's glance angle, degrees from the plate's normal, a provisional value: Peter Jones's long bodkin against 1.5 mm mild steel "penetrated perhaps 2 mm beyond the inner surface of the plate and then broke while the rest of the arrow ricocheted" at 60 degrees and ricocheted at 70 (Hardy, Longbow, as quoted at https://willscommonplacebook.blogspot.com/2007/02/glancing-blows-and-armor-penetration.html, not read at the book), the prototype publishes 60 degrees from this quoted trial, not a universal critical angle. Williams's table of the energy to defeat mild steel at an angle (The Knight and the Blast Furnace, 2003, quoted there), rising to twice the square-on energy at 60 degrees, and Hinsley's 30-degree strikes (The Historian, 2015, pp. 31-32) give no glance angle. Searched for #3500 without a primary figure: Jones 1992 (Materials Characterization 29) and the DTIC report ADA030268 on spheres ricocheting from thin plates (unreadable). Magier et al. 2017, DOI 10.5604/01.3001.0010.5152, uses two specific 96 g arrow types against 2 mm steel in finite-element simulations and reports ricochet near 52 degrees; those specimen-specific outcomes do not establish a universal cutoff (author-hosted primary PDF, https://www.researchgate.net/profile/Pawel-Zochowski/publication/320288999_NUMERICAL_ANALYSIS_OF_ENGLISH_BOWS_USED_IN_BATTLE_OF_CRECY/links/59ef29ae458515ec0c7a1284/NUMERICAL-ANALYSIS-OF-ENGLISH-BOWS-USED-IN-BATTLE-OF-CRECY.pdf).
A plate piece's glance angle, degrees from the plate's normal, a provisional value: Peter Jones's long bodkin against 1.5 mm mild steel "penetrated perhaps 2 mm beyond the inner surface of the plate and then broke while the rest of the arrow ricocheted" at 60 degrees and ricocheted at 70 (Hardy, Longbow, as quoted at https://willscommonplacebook.blogspot.com/2007/02/glancing-blows-and-armor-penetration.html, not read at the book), the prototype publishes 60 degrees from this quoted trial, not a universal critical angle. Williams's table of the energy to defeat mild steel at an angle (The Knight and the Blast Furnace, 2003, quoted there), rising to twice the square-on energy at 60 degrees, and Hinsley's 30-degree strikes (The Historian, 2015, pp. 31-32) give no glance angle. Searched for #3500 without a primary figure: Jones 1992 (Materials Characterization 29) and the DTIC report ADA030268 on spheres ricocheting from thin plates (unreadable). Magier et al. 2017, DOI 10.5604/01.3001.0010.5152, uses two specific 96 g arrow types against 2 mm steel in finite-element simulations and reports ricochet near 52 degrees; those specimen-specific outcomes do not establish a universal cutoff (author-hosted primary PDF, https://www.researchgate.net/profile/Pawel-Zochowski/publication/320288999_NUMERICAL_ANALYSIS_OF_ENGLISH_BOWS_USED_IN_BATTLE_OF_CRECY/links/59ef29ae458515ec0c7a1284/NUMERICAL-ANALYSIS-OF-ENGLISH-BOWS-USED-IN-BATTLE-OF-CRECY.pdf).