AutoMovie API
    Preparing search index...

    Variable validateWetZonesConst

    validateWetZones: (
        props: IAutoMovieValidateWetZones.IProps,
    ) => IAutoMovieValidation = ...

    Validate the wet and waterproofed regions a network declares.

    This is the half of building services a frame is worst at showing. A tiled room with a gully in it renders identically whether the membrane reaches the walls or stops at the screed, whether the floor falls toward the gully or away from it, and whether the sleeve carrying a pipe through the tanking was made good. Those are the facts a leak is found in, so they are stated and checked here rather than inferred from a look.

    The zone owns no geometry of its own on purpose. Its extent is the architecture's logical space, its membrane is that space's own boundaries, and its drains are the service network's nodes, so a zone can disagree with neither. What it adds is the obligations those three cannot state alone: that a wet region is covered everywhere water can reach, that every handover to a drier region is declared, that the floor actually falls, and that it falls to a drain that really discharges waste. Slope and membrane upturn are declared scalars; this gate does not measure an actual floor gradient or infer waterproof construction from mesh geometry.