The antihelix's course, along its crest from its lower end at the antitragus up its body and on along its superior crus to the
helix's top. Each centre is a crest read by FamilyConicScan.ts helix 79 7 ridges (side distance over the auricle's least-squares plane
z = 26.36 - 0.651 x + 0.041 y, from the concha's middle [13, 1568] and the fossa's [9, 1587]), sunk 2.2 mm, the tube's radius, along
that plane's normal (0.545, -0.034, 0.838) toward the head, so the tube's top stands on the crest. The upper end stops 3 mm short
of the crest's last reading, sunk 1.5 mm more, inside the plate and more than 2.5 mm clear of the helix's tube and blend: carried into
the helix's tube, the antihelix's merge curve crossed the helix's blend and no rail stood beside it, so the two tubes' blends must not
meet. The lower two are sunk 2 and 1.5 mm more: measured against the plate (a scratch probe, the signed distance from the course to
the plate's surface every millimetre), the course runs 0 to 1.2 mm outside the plate's face along the body and 0.1 mm inside it at its
lower end, where the merge's walk was lost; sunk, the end stands 2 mm inside. Measured along both whole courses (a scratch probe), the
antihelix's body overlapped the helix's lower limb by up to 0.7 mm at 1,563 to 1,570 mm and stood within 2.5 mm of it from 1,561 to
1,577 mm, so their blends met: the lower four centres stand 2 mm farther in along the plate and the helix's lower limb 1 mm farther
out, the antihelix 1.5 mm and the helix's limb 2 mm round there, and the two tubes stay at least 2.95 mm apart everywhere.
The antihelix's course, along its crest from its lower end at the antitragus up its body and on along its superior crus to the helix's top. Each centre is a crest read by
FamilyConicScan.ts helix 79 7 ridges(side distance over the auricle's least-squares planez = 26.36 - 0.651 x + 0.041 y, from the concha's middle [13, 1568] and the fossa's [9, 1587]), sunk 2.2 mm, the tube's radius, along that plane's normal(0.545, -0.034, 0.838)toward the head, so the tube's top stands on the crest. The upper end stops 3 mm short of the crest's last reading, sunk 1.5 mm more, inside the plate and more than 2.5 mm clear of the helix's tube and blend: carried into the helix's tube, the antihelix's merge curve crossed the helix's blend and no rail stood beside it, so the two tubes' blends must not meet. The lower two are sunk 2 and 1.5 mm more: measured against the plate (a scratch probe, the signed distance from the course to the plate's surface every millimetre), the course runs 0 to 1.2 mm outside the plate's face along the body and 0.1 mm inside it at its lower end, where the merge's walk was lost; sunk, the end stands 2 mm inside. Measured along both whole courses (a scratch probe), the antihelix's body overlapped the helix's lower limb by up to 0.7 mm at 1,563 to 1,570 mm and stood within 2.5 mm of it from 1,561 to 1,577 mm, so their blends met: the lower four centres stand 2 mm farther in along the plate and the helix's lower limb 1 mm farther out, the antihelix 1.5 mm and the helix's limb 2 mm round there, and the two tubes stay at least 2.95 mm apart everywhere.